Preservation of timber | Methods -learn civil


PRESERVATION OF TIMBER

Timber has to be preserved from moisture, dry rot or internal decay and from the attacks of
insects. Paint on seasoned timber preserves it from moisture and extends its life indefinitely if
renewed periodically. Many process have been adopted for protecting timber from dry rot and
insects by impregnating it with chemical substances. Tarring, Charring, Painting and creosoting
are the usual methods of preservation. Also read: Defects in timber


Types of Preservatives:

1. Ascu treatment
2. Chemical salts
3. Coal tar
4. Creosote oil
5. Solignum paints
Preservation of timber


1. Ascu treatment:

The ascu is special preservative which is developed at the Forest Research Institute, Dehradun. Its composition is 1 part by weight of hydrated arsenic pentoxide, 3parts by weight of copper sulphate & 4parts by weight of potassium dichromate.

This material is available in powder form. The solution is prepared by mixing, six parts by weight of ascu in 100 parts by weight of water. The solution is then sprayed or applied on timber surface. This preservative gives timber protection against the attack of white ants. The surface treated with this preservative can be painted, polished, varnished or waxed.

Ascu treated timber has been used for posts. columns. road pillars & road signs. It has been
found suitable for marine works & bamboo fencing.


2. Chemical salts:

These are water-born preservatives and they are mostly salts dissolved in water. The usual salts used are copper sulphate, mercury chloride, sodium fluoride and zinc chloride. The solutions are prepared from these salts and they are applied on the timber surface. These preservatives are odourless and non-inflammable.

3. Coal tar:
Preservation of timber

The timber surface is coated with hot coal tar with the help of a brush. The coal tar has unpleasant
smell and appearance. It makes timber unsuitable for painting. Hence the charring is adopted for
frames of doors and windows, tough timber work, etc.

4. Creosote oil:
Preservation of timber

In this method, the timber surface is coated with creosote oil. The process is known as the creosoting or bethel's method of preservation of timber. The creosote-treated timber is free from the attack of white ants. The cresting doubles the life of the timber and is generally adopted for piles, poles, railway sleepers, etc.

5. Solignum paints:

These paints preserve timber from white ants as they are highly toxic in nature. They can be
mixed with colour pigments and applied in hot state with the help of a brush.

Also read: Important interview Questions: Storage of timber and Market forms of timber

Methods of preservation:

  • Brushing
  • Charring
  • Dipping and steeping
  • Hot and cold open tank treatment
  • Spraying
  • Fireproofing of timber


  • Brushing:
    Preservation of timber

Preservative is applied on timber surface by brushes. The cracks should be filled before applying preservative. One or more coats of preservative may applied. This method is most commonly used for the preservation of seasoned timbers.

  • Charring:
    Preservation of timber

In This method no preservative applied. The surface charred is kept wet for about half an hour and is burnt upto a depth of about 15 mm over a wood fire and then cooled with water. Due to of coal is formed on the surface. This layer act as a preservative & it is not attacked by white ants, fungi, etc. The process of charring is adopted for lower ends of posts for fencing. telephone etc which are embedded in the ground.

  • Dipping and steeping:

Timber may be dipped or soaked in solution preservative or wetting of timber with preservative may be carried out for a few hours to days or weeks. Preservative penetrates inside the timber in a better way as compared to spraying.

  • Hot and cold open tank treatment:

The timber is submerged in a tank containing a solution of preservative which is heated for a few hours at a temperature of 85°C to 95°C. The tank then allowed to cool down gradually. This method is effective in giving protection to the sapwood. Injecting under pressure: The preservative is injected under pressure into the timber. This method is usually adopted in creosoting. Also read: Seasoning of timber 

  • Spraying:
    Preservation of timber

A pistol is used to spray the solution of preservative on the timber surface under pressure. This method is effective & better than brushing.

  •  Fire Proofing of timber:

Timber cannot be made completely fireproof, however, by treating as below it can be made fire resistant to a sufficient extent.
Soaking timber in ammonium sulphate, ammonium chloride, ammonia phosphate, sodium
arsenate, zinc chloride etc. or spraying on timber, a solution of sodium silicate, potassium silicate or ammonia phosphate etc. imparts fire resisting properties.

Abel's methods of fireproofing timber is painting the surface first with a dilute solution of sodium silicate then with a cream like paste of slaked fat time and in the end with a concentrated solution of silicate of soda.


Post a Comment

0 Comments